SKYSTARS STX225 DIY Version 225mm RC FPV Racing Drone PNP w/ F4 OSD 35A RGB LED 1200TVL 40CH 600mW VTX - 119.00 €

SKYSTARS STX225 DIY Version 225mm RC FPV Racing Drone PNP w/ F4 OSD 35A RGB LED 1200TVL 40CH 600mW VTX
Seller: Banggood,
Ship from: CN Warehouse, Usually dispatched in 1-3 work days.

FREE SHIPPING: 10-35 days. (DHL faster please check price/quantity first)
Free shipping aviable, Registered postage from 25 €


SKYSTARS STX225 DIY Version 225mm RC FPV Racing Drone PNP w/ F4 OSD 35A RGB LED 1200TVL 40CH 600mW VTX
Notice: this is the DIY version that comes unassembled.

Brand name: SKYSTARS
Item name: STX225 DIY version FPV racing drone PNP
Recommended 3-5S battery (package not included)
Frame kit Wheel base: 225mm
Frame arm thickness: 4mm
Bottom plate thickness: 2mm
Side plate thickness: 2mm
Frame kit material: 3K carbon fiber
2204 2300KV Brushless Motor Motor KV: 2300RPM/V
Idle current (Io/10V): 1.26A
Lipo cell: 3-5S
Weight: 26g
Max continuous current: 25A
Max continuous power: 240W
Max thrust: 700g (4S/5")
Configu-ration: 12N/14P
Motor resistance (RM): 0.0572 Ω
Stator diameter: 22mm
Stator thickness: 4mm
Motor diameter: 27.55mm
Motor body length: 20mm
Overall shaft length: 34.2mm
Prop adapter shaft: M5
Bolt holes spacing: 16mm
Bolt thread: M3
Propeller: 5inch
35A BLHeli_32 RGB LED ESC Continuous current: 35A
Peak Current: 40A(10S)
Input voltage: 2-5S
BEC: NO bec
Main control chip: STM32F051
Firmware: BLHeli_32 supports 500HZ PWM, Oneshot125, Oneshot42, Multishot, Dshot150/300/600/1200.
Customized F4 Flight Controller Main control chip: STM32F405
Power supply: 5V
Integrated OSD
Onboard LC filter
PID cycle rate & gyro refresh rate up to 8Khz
Supports BetaFlight / inva racing firmware
1200TVL CMOS Camera Case size: 19mm*19mm
Weight: 9.5g
Total pixels: PAL: 1020H×596V (0.61MP); NTSC: 1020H×508V (0.52MP)
Effective pixels: PAL: 976H×582V (0.57MP); NTSC: 976H×494V (0.48MP)
Signal system: PAL/NTSC switchable
Resolution ratio(horizontal center): 1200TVL
Video output: 1.0Vp-p/75Ω
Automatic gain control: yes
White balance: on/off optional
Exposure mode: electron exposure
Electronic shutter: 1/50(1/60) - 1/100000 S
Gamma correction: 0.45/1.0
Synchronization method: inter-sync
Camera lens: standard 2.3mm
Lens operating voltage: DC12V (wide voltage, measured can work normally at 7.5-13V)
Working current: 70mA (low power consumption)
Working temperature: -20℃~-60℃
Humidity: 0%~98%
5.8G 40CH 600mw switchable VTX Output power & transmission distance: ≥[email protected], ≥[email protected], ≥[email protected]
Transmitting power: 600mW
Full video format: NTSC /PAL
Input voltage & power dissipation: 7V~24V, +12V/190mA
Size: 38*18*8mm
Weight: ≤16g(except antenna)
With output power self-check function.
Nixie tube SCAN: frequency point (1-8), frequency band (A-E), power (1-3, 0=0mw, 1=25mw, 2=200mw, 3=600mw)
Antenna: RP-SMA
5042 3 Blade Propeller Material: PC
Mounting hole: 5mm
Center thickness: 8mm
Quantity: 2 pairs
Weight: 7.25G a pair
Color: blue, red, yellow, purple, white MIX
Delivery color randomly

Package included:
1x STX225 DIY version FPV racing drone PNP

Add Comment

Latest products

Latest views